Scanned Images Turn Out Elongated - Fujitsu fi-6800 Operator's Manual

Chapter 7 Troubleshooting

Scanned images turn out elongated.

Are the rollers dirty?
No
Does the condition of the documents fulfill the
requirements described in "Precautions" in
(page 37)?
Yes
Are any of the consumables (*1) worn out?
No
Have you adjusted [Offset/Vertical Magnification
Adjustment]?
Yes
*1: "Consumables" refers to the pick roller, separator roller and brake roller.
Clean the rollers.
For more information on cleaning, refer to
Yes
Sheet)" (page 84)
Use a document that satisfies the required conditions.
"Paper Quality" For more details, refer to
No
Check the consumable counters. Replace the consumables if necessary.
For information on how to replace consumables, refer to
Yes
Consumables" (page
In [Hardware Setting] of the Software Operation Panel, adjust the scan scale in the
feeding direction.
No
For more details, refer to
Vertical Magnification Adjustment]" (page
If the above countermeasures do not solve the problem, check the items in
Before You Contact the Scanner Service Provider" (page 128)
your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
"5.2 Cleaning the ADF (with Cleaning
or "5.3 Cleaning the ADF (with cloth)" (page
"2.2 Documents for Scanning" (page
93).
"Adjusting the Starting Position for Scanning [Offset/
149).
Contents
Introduction
86).
Scanner
Overview
37). How to Load
Documents
How to Use
the Operator
"Chapter 6 Replacing
Panel
Various Ways
to Scan
Daily Care
Replacing
"7.4
Consumables
first, then contact
Troubleshooting
Operational
Settings
Appendix
Glossary
TOP
Index
126