Chapter 8 Operational Settings
Specifying the Cycle to Replace Consumables
[Life Counter Alarm Setting]
You can specify the replacement cycle of the consumables.
The background color of the counter changes to light yellow
when the page count after replacing the consumable reaches
95% of the value specified here, and turns yellow when it
reaches 100%. You can also display the message for
replacing consumables
(page
1
Start up the Software Operation Panel.
Refer to
"8.1 Starting Up the Software Operation Panel" (page
2
From the listing on the left, select [Device Setting 2]
[Life Counter Alarm Setting].
147).
132).
3
Specify a value for the life cycle for replacing each
consumable (Pick roller, separator roller and brake roller).
The specifiable value is from 10,000 to 2,550,000 in increments of
10,000.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
148