With Ashtray
•
Open lid and remove the ashtray.
•
Remove the two self-tapping screws.
•
Gently pull out on the two retaining clips,
unplug the cigarette lighter harness connector,
vehicle connector, illumination bulb ,and
remove the center holder.
DASHBOARD
CENTER
HOLDER
ASHTRAY
SELF-TAPPING
SCREW (Reuse.)
RETAINING
CLIPS (2)
6 of 20
13. Remove the pocket:
ILLUMINATION
BULB
CIGARETTE
LIGHTER
HARNESS
CONNECTOR
VEHICLE
CONNECTOR
2730010K
14. Remove the right and left inner covers (one hook
AII 24046 (0208)
•
Apply masking tape to the edge of the center
panel.
•
Remove the two self-tapping screws.
•
Push in on the bottom of the lid, then pull out
on the top by inserting the end of a hook tool
between the pocket and center panel, and
pulling it to out toward you to release the two
retaining clips.
HOOK TOOL
RETAINING
CLIPS (2)
Push
POCKET
SELF-
TAPPING
SCREW
(Reuse.)
and one clip for each cover).
CLIP
LEFT INNER
COVER
HOOK
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
CENTER PANEL
MASKING
TAPE
LID
2206073K
RIGHT INNER
COVER
POCKET
OPENING
2226010K