Honda 08A23-2E1-010 Installation Instructions Manual page 4

3. Using the Scissors, cut out the marked areas
from the template along the lines.
MASKING TAPE
TEMPLATE
HEADLINER
Cut out the areas.
4. Position the template on the headliner with the
round cutout over the plug and the front edge
against the sunroof opening. Tape the template to
the headliner using strips of masking tape.
5. Using the felt-tip pen, mark the headliner along
the edges of the square cutout in the template.
Using the utility knife, cut out the marked areas of
the headliner.
6. Reaching through the opening you just made in
the headliner, mark the vehicle frame at the
center line of the template.
TEMPLATE
(Remove.)
7. Remove the template from the headliner.
4 of 20
Cut out
UTILITY
the area.
KNIFE
FELT-TIP
PEN
TEMPLATE
2326021T
VEHICLE FRAME
(Mark the frame at
the center line of
the template.)
FELT-TIP PEN
2326030T
8. Using scissors, cut out the marked area from the
template, then align the center line of the template
with the mark you made in step 6. Tape the
template to the headliner again.
9. Using the felt-tip pen, mark the headliner around
the edges of the template where you just cut.
TEMPLATE
10. Using the utility knife, cut out the marked area of
the headliner. Remove the template.
AII 24046 (0208)
TEMPLATE
CENTER LINE
(Align with the mark
made in step 6.)
Cut out the area of
TEMPLATE
the template.
Cut out the area.
HEADLINER
FELT-TIP PEN
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
2326040T
UTILITY
KNIFE
2326050T