Honda 08A23-2E1-010 Installation Instructions Manual page 18

68. Get the pocket. Using a utility knife, cut the two
lugs off from the pocket.
LUG
69. Install one latch to each to the left and right player
brackets.
70. Position the DVD player and pocket on the left and
right player brackets, and install four 5 x 8 mm
washer-screws, and the two 4 x 8 mm self-
tapping screws.
1 mm
LATCH
LATCH
LEFT PLAYER
BRACKET
PLAYER
POCKET
4 x 8 mm
SELF-TAPPING
SCREW
18 of 20
LUG
(Cut off.)
2529041T
POCKET
1 mm
LATCH
LATCH
5 x 8 mm
WASHER-
SCREWS (4)
RIGHT
PLAYER
BRACKET
2306031T
4 x 8 mm
SELF-TAPPING
SCREW
71. Plug the subharness 4-pin connector, the DIN
harness terminal and the i -VES harness terminal
into the rear of the DVD player (plug the i -VES
harness terminal into the yellow label position).
DVD PLAYER
SUB HARNESS 4-PIN
CONNECTOR
72. Install the DVD player to the brackets using four 6
mm flange nuts.
DVD
PLAYER
6 mm
FLANGE
NUT
POCKET
AII 24046 (0208)
YELLOW
LABEL
i -VES HARNESS
TERMINAL
DIN HARNESS
TERMINAL
2326411T
LEFT PLAYER
SUBBRACKET
RIGHT PLAYER
SUBBRACKET
PLAYER
BASE-
BRACKET
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
2326420T