Additional Safety Rules - Makita 3600BR Instruction Manual

I
ADDITIONAL SAFETY RULES
1. Handle the bits very carefully.
2. Check the bit carefully for cracks or damage before operation. Replace
cracked or damaged bit immediately.
3~
Avoid cutting nails. Inspect for and remove all nails from the workpiece be ­
fore operation.
4.
Hold the. tool firmly with both hands.
I
I
5. Keep hands away from rotating parts.
I
6. Make sure the bit is not contacting the workpiece before the switch is turned
on.
7. Before using the tool on an actual workpiece, let it run for a while. Watch
for vibration or wobbling that could indicate improperly installed bit.
8. Be careful of the bit rotating direction and the feed direction.
9. Do not leave the tool running. Operate the tool only when hand-held.
10. Always switch off and wait for the bit to come to a complete stop before
removing the tool from workpiece.
11. Do not touch the bit immediately after operation; it may be extremely hot
and could burn your skin.
SAVE THESE INSTRUCTIONS.
4