Trimmer Guide - Makita 3600BR Instruction Manual

Trimmer guide
Trimming, curved cuts in veneers for fur­
niture and the like can be done easily with
the trimmer guide. The guide roller rides
the curve and assures a fine cut.
Install the trimmer guide on the guide
holder with the wing bolt (8). Tighten the
wing bolt (8) only tight enough to hold the
trimmer guide temporarily. Then insert the
guide holder into the holes in the tool base
and tighten the wing bolt (A). Adjust the
distance between the bit and the trimmer
guide by turning the fine adjusting screw
(1.5 mm or about 1/16" per turn). At the
desired distance, tighten the wing bolt
(8) to secure the trimmer guide in place.
When adjusting the guide roller up or down,
loosen the wing bolt (C). After adjusting
it, tighten the wing bolt (C) securely.
When cutting, move the tool with the guide
roller riding the side of the workpiece.
Wing bolt (A)
Gu ide holder
,
Wing bolt (B)
Wing bolt
(el
Guide roller
Guide roller
9