Related Manuals for Makita RD1100
Summary of Contents for Makita RD1100
- Page 1 Router MODEL RF1100/RF1101 MODEL RD1100/RD1101 003648 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. w w w . m a k i t a t o o l s . c o m...
-
Page 2: Specifications
24,000/min. 8,000 - 24,000/min. 223 mm (8-3/4”) 3.2 kg (7.1 lbs) Electrical Safety 4. Grounded tools must be plugged into an RD1100 1/2” and 1/4” 24,000/min. 8,000 - 24,000/min. 3.6 kg (7.9 lbs) outlet properly installed and grounded in accordance with all codes and ordi- nances. -
Page 3: Personal Safety
5. Avoid body contact with grounded sur- faces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. - Page 4 SERVICE 23. Tool service must be performed only by qualified repair personnel. Service or main- tenance performed by unqualified personnel could result in a risk of injury. USE PROPER EXTENSION CORD: Use only three-wire extension cords that have three- prong grounding-type plugs and three-pole receptacles that accept the tool’s plug. Make sure your extension cord is in good condition.
-
Page 5: Specific Safety Rules
Fig. A SPECIFIC SAFETY RULES DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to router safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. 1. Hold tool by insulated gripping surfaces... - Page 6 13. Do not touch the bit immediately after operation; it may be extremely hot and could burn your skin. 14. Always lead the power supply cord away from the tool towards the rear. 15. Do not smear the tool base carelessly with thinner, gasoline, oil or the like.
-
Page 7: Functional Description
FUNCTIONAL DESCRIPTION 003653 1. Motor unit housing 2. Index line 3. Scale ring 4. Graduation 5. Lock lever 003661 1. Switch lever CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. - Page 8 003663 1. Motor unit cord 2. Outlet 3. Lock button 4. Switch trigger For RD1100 and RD1101 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released.
- Page 9 ASSEMBLY 003672 1. Lock lever 003673 1. Wrench 2. Router bit 003674 1. Pin CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing or removing the bit CAUTION: •...
-
Page 10: Operation
3. Workpiece 4. Straight guide For equipped with switch-in-handle For model RD1100 and RD1101 only Connect the motor unit cord to the outlet in the handle. Set the tool base on the workpiece to be cut without the bit making any contact. Then turn the tool on and wait until the bit attains full speed. - Page 11 003693 1. Lock nut 2. Templet guide 3. Base plate 4. Router bit Straight guide (optional accessory) The straight guide is effectively used for straight cuts when chamfering or grooving. To install the straight guide, insert the guide bars into the holes in the tool base.
-
Page 12: Maintenance
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. - Page 13 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 14 Memo...
- Page 15 Memo...
- Page 16 Memo...
- Page 17 First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold...
- Page 18 Paste 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog 4. Most favored points are: Design Features Size Price Makita Brand MODEL NO. YEAR SERIAL NO. PHONE 20-29 30-39 40-49 Paste Paste Radio Exhibition...
-
Page 19: Factory Service Centers
Date Purchased When you need service: Send complete tool (prepaid) to one Dealer’s Name & Address of the Makita Factory Service Centers listed, or to an Authorized Makita Service Center. Be sure to attach a letter to the outside of Model No. - Page 20 MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.