Ptz Setting - Honeywell 3MP User Manual

Administrating the Device

PTZ Setting

Camera Protocol:
This device can connect to a PTZ camera or speed dome camera and controls them thru
RS485 interface.
Camera Address:
This is the camera ID set in PTZ camera or speed dome camera. Note that please DO
NOT change the default value if unnecessary. If so, user needs to check and set value
properly for both sides.
Baud rate:
This is the communication speed between network camera and P/T scanner.
Note If need to change these parameters, user needs to check and set value properly for
both, network camera and P/T scanner.
36