Table of Contents
Advertisement
4 Hardware Installation
1.
Fix the included stand to desired location
2.
Attach the Camera to the stand
3.
Plug an Ethernet cable into the Camera
Connect an Ethernet cable to the LAN socket located on the camera's rear and attach it to
the network.
4.
Connect the external power supply to Camera if not powering by PoE
Connect the power adapter to the DC / AC power jack of the camera.
5.
Done
Once you have installed the camera well and powered it on, the Power LED (orange) will
turn on later. Once the Power LED turned on, it means the system is booting up
successfully. Furthermore, if you have a proper network connection, and access to the
camera, the LAN LED will flash green.
Honeywell
7
Advertisement
Table of Contents
