Makita HP1620 Technical Information page 8

R
epair
< 8 > Mounting armature
( 1 ) Hold cam holder complete as illustrated in Fig. 21.
< Note >
The cam portion has not to come on the supporter. Otherwise, it is impossible to hold
cam holder complete horizontally.
Something to hold
cam older complete
( 2 ) Mount armature assembly to cam holder complete by pressing with arbor press. See Fig. 22.
( 3 ) Mount plate 19 to cam holder complete. After mounting steel ball 5.0 to change lever, push the change lever
into cam holder complete. See Fig. 23.
Steel ball 5.0
Cam holder complete
Cam portion
Fig. 21
Fig. 22
Plate 19
Cam holder complete
Something to hold
cam holder complete
Fig. 23
< Note >
Apply MAKITA grease N No.1 to
steel ball 5.0 before mounting it.
Cam holder complete with
armature
P 8 / 12