Makita HP1620 Technical Information page 10

R
epair
< 10 > Mounting field and brush holder unit
( 1 ) After connecting brush holder unit with field, mount them to housing L. And connect 2 lead wires
(black) of switch to brush holder unit as illustrated in See Fig. 27.
Recess portion
( 2 ) Mount armature, cam holder complete and gear section by passing through field and brush holder unit. See Fig. 28.
( 3 ) Mount housing R in the order of Fig. 14, 15 and Fig. 16. See page 5.
Fig. 27
Brush holder unit
Switch
Brush holder unit and field have to be so mounted
to housing L, that the recess portion of brush holder
unit has to be faced to switch.
Housing L
Fig. 28
P 10 / 12
Connect 2 lead
wires (black) of
switch to brush
holder unit.
Field
Brush holder
unit
Switch