Makita HP1620 Instruction Manual
Hide thumbs
Also See for HP1620:
- Instruction manual (45 pages) ,
- Technical information (12 pages) ,
- Instruction manual (37 pages)
Related Manuals for Makita HP1620
Summary of Contents for Makita HP1620
- Page 1 INSTRUCTION MANUAL Hammer Drill HP1620 HP1620F HP1621 HP1621F 004358 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model HP1620/HP1620F/HP1621/HP1621F Concrete 16 mm Capacities Steel 13 mm Wood 30 mm No load speed (min 0 - 2,800 Blows per minute 0 - 44,800 Overall length 303 mm Net weight 2.0 kg Safety class • Due to our continuing program of research and development, the specifications herein are subject to change without notice. - Page 3 Do not abuse the cord. Never use the cord for Power tool use and care carrying, pulling or unplugging the power tool. 18. Do not force the power tool. Use the correct Keep cord away from heat, oil, sharp edges or power tool for your application.
-
Page 4: Hammer Drill Safety Warnings
GEB003-5 FUNCTIONAL DESCRIPTION HAMMER DRILL SAFETY WARNINGS CAUTION: Always be sure that the tool is switched off and Wear ear protectors when impact drilling. • unplugged before adjusting or checking function Exposure to noise can cause hearing loss. on the tool. Use auxiliary handle(s), if supplied with the tool. - Page 5 1. Action mode Installing or removing drill bit changing lever For Model HP1620, HP1620F 1. Chuck key 004362 This tool has an action mode change lever. For rotation with hammering, slide the action mode change lever to the right ( symbol).
-
Page 6: Operation
For Model HP1621, HP1621F Be sure to use a tungsten-carbide tipped bit. Position the bit at the desired location for the hole, then 1. Sleeve pull the switch trigger. Do not force the tool. Light 2. Ring pressure gives best results. Keep the tool in position and prevent it from slipping away from the hole. -
Page 7: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Tungsten-carbide tipped hammer bit • Hole saw • Blow-out bulb •... - Page 8 Makita Corporation Anjo, Aichi, Japan www.makita.com 884507-925...