Operation - Makita JR3030 Instruction Manual

OPERATION
Press the shoe firmly against the work-
piece.
Do
not allow the tool to bounce.
Bring the blade into light contact with the
workpiece. First, make a pilot groove, using
a slower speed. Then use a faster speed to
continue cutting.
CAUTION:
*Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause
*Always wear gloves to protect your hands from hot flying chips when cutting metal.
*Always press the shoe firmly against the workpiece during operation. If the shoe is held
away from the workpiece during operation, strong vibration and/of twisting will be pro-
duced, causing the blade to snap dangerously.
Be sure to always wear suitable eye protection which conforms with current national
standards
premature blade wear.
9