Makita JR3030 Instruction Manual page 4

Specific Safety Rules
1. Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring
or
its o w n cord. Contact with
a "live" wire will also make exposed metal parts of the tool "live" and shock
the operator.
2. Avoid cutting nails. Inspect workpiece for any nails and remove them before
operation.
3.
Do not cut oversize workpiece.
4. Check for the proper clearance beyond the workpiece before cutting so that
5. Hold the tool firmly.
6.
Make sure the blade is not contacting the workpiece before the switch is
7.
Keep hands away from moving parts.
8.
Do not leave the tool running. Operate the tool only when hand-held.
9.
Always switch off and wait for the blade t o come to a complete stop before
IO.
Do not touch the blade or the workpiece immediately after operation; they
the blade will not strike the floor, workbench, etc.
turned on.
removing the blade from the workpiece.
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
4