Maintenance - Makita JR3030 Instruction Manual

MAINTENANCE
CAUTIO N :
Always be sure that the tool is switched off and unplugged before attempting
to
perform
inspection
or
maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down to
the limit mark. Keep the carbon brushes
clean and free to slip in the holders. Both
carbon brushes should be replaced at the
same time. Use only identical carbon
brushes.
Use a screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure
the brush holder caps.
L
Limit mark
Brush holder
cao
Screwdriver
I
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjust-
ment should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
10