Related Manuals for Makita JR3000V
Summary of Contents for Makita JR3000V
- Page 1 Recipro Saw MODEL JR3000V 002477 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
It is suitable for Responsible manufacturer: straight and curved cutting. Makita Corporation Anjo Aichi Japan Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. -
Page 3: General Safety Rules
GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool. -
Page 4: Specific Safety Rules
20. Maintain power tools. Check for misalignment or ditions and the work to be performed. Use of the binding of moving parts, breakage of parts and power tool for operations different from those any other condition that may affect the power intended could result in a hazardous situation. -
Page 5: Functional Description
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting the shoe 002485 When the blade loses its cutting efficiency in one place along its cutting edge, reposition the shoe to utilize a sharp, unused portion of its cutting edge. -
Page 6: Operation
ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing or removing saw blade 002503 CAUTION: • Always clean out all chips or foreign matter adhering to the blade, blade clamp and/or slider. -
Page 7: Maintenance
CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. - Page 8 Makita Corporation Anjo, Aichi, Japan 883133B220...