Honeywell TB7200 Series Installation Instructions Manual page 19

Agency Approvals all models
FCC: Compliant to CFR 47, Part 15, Subpart B, Class A (US)
CE: EMC Directive 89/336/EEC (Europe Union)
Agency Approvals wireless models
FCC: Compliant to: Part 15, Subpart C This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Agency Approval BACnet models
BTL
IMPORTANT
All TB7200 series controls are for use as operating controls only and are not safety devices. These instru-
ments have undergone rigorous tests and verifications prior to shipment to ensure proper and reliable opera-
tion in the field. Whenever a control failure could lead to personal injury and/or loss of property, it becomes the
responsibility of the user/installer/electrical system designer to incorporate safety devices (such as relays, flow
switch, thermal protections, etc.) and/or alarm system to protect the entire system against such catastrophic
failures. Tampering of the devices or miss application of the device will void warranty.
TB7200 SERIES COMMUNICATING ZONE THERMOSTATS
19 62-2019—05