HP 8360 User Handbook Manual page 423

Models
Options
Specifications
Pulse Sync Out (Option 002 only)
Outputs a 50 ns wide TTL pulse synchronized to the leading edge of
the internally-generated pulse. (BNC female, rear panel.)
AM/FM Output (Option 002 only)
Outputs the internally-generated AM or FM waveform. This output
can drive 50 ohms or greater. The AM output is scaled the same as
it is generated, either 100%/V or 10 dB/V. The FM scaling depends
on the FM deviation selected. (BNC female, rear panel.)
HP 83620A: 10 MHz to 20 GHz
HP 83622A: 2 to 20 GHz
HP 83623A: 10 MHz to 20 GHz High Power
HP 83624A: 2 to 20 GHz High Power
HP 83630A: 10 MHz to 26.5 GHz
HP 83640A: 10 MHz to 40 GHz
HP 83650A: 10 MHz to 50 GHz
Option 001 Add Step Attenuator
With this option, minimum settable output power is -110 dBm.
Maximum leveled output power is lowered by 1.5 dB to 20 GHz, and
2 dB above 20 GHz, and 2.5 dB above 40 GHz.
Option 002 Add Internal Modulation Generator
Adds a digitally-synthesized internal modulation waveform
source-on-a-card to the HP 8360. It provides signals that would
otherwise be supplied to the external modulation inputs.
Option 003 Delete Keyboard/Display
For security, tamper-resistance and cost savings in automated
system applications, this option deletes the keyboard and display.
Option 003 does not move the front panel connectors to the rear
panel, however, so in most cases, Option 004 should be ordered in
conjunction with Option 003.
Option 004 Rear Panel RF Output
Moves the RF Output, External ALC Input, Pulse Input/Output,
AM Input, and FM Input connectors to the rear panel.
Option 006 Fast Pulse Modulation
Improves pulse rise/fall time to 10 ns. Also effects maximum leveled
output power and harmonic performance.