HP 8360 User Handbook Manual page 382

Function Group
Menu Map 5
Description
Programming Codes
See Also
Function Group
Menu Map 2
Description
POWER
This softkey activates the power step size function. It can be set
from 0.01 to 20 dB. In this mode, power is stepped by the up/down
arrow keys. An asterisk next to the key label indicates this feature is
active.
POWer:STEP:AUTO ONlOFFlllO
Analyzer: SP or SHPL and UP or DOWN
CW,
"Programming Typical Measurements," in Chapter 1.
FREQUENCY
This softkey lets you set the frequency step size for the CW
frequency mode. The step size may be set from 1 Hz to 10
incremented/decremented by pressing the up/down arrow keys.
If an underline cursor appears under a digit in the entry display, then
the value will be modified by the up/down arrow keys or the rotary
knob. The increment/decrement size in this case is the underlined
digit by the power of 10.
If the up/down function is on (asterisk next to key label) and the
cursor is not under one of the active entry area digits, then frequency
value is changed by the up/down size using either the up/down arrow
keys or the rotary knob.
HP 8360
User's Handbook