Mitsubishi Electric MXZ-SM72TAM-U1 Service Manual page 137

3. Select a mode
• Press the
• Direct the wireless remote controller toward the receiver of the indoor unit and press the
Current setting number: 1=1 beep (1 second)
4. Select the setting number
• Press the
• Direct the wireless remote controller toward the receiver of the indoor unit and press the
5. Select multiple functions continuously
• Repeat the steps 3 and 4 to change multiple function settings continuously.
6. Complete function selection
• Direct the wireless remote controller toward the sensor of the indoor unit and press the
Note:
• Be sure to write down the settings for all functions if any of the initial settings has been changed after the completion
of installation work.
13-6. Error history
Operating instructions
1. Open the Service menu and select "Check".
• Select ˝Service˝ from the main menu, and press the [SELECT] button.
• Select ˝Check˝ with the F1 or F2 button, and press the [SELECT] button.
S e v r c i e m e
Test run
Input maintenance info.
Settings
Check
Others
Main menu: RETURN
C u s r r o
F1 F2
SELECT
MENU RETURN
HOLD
2. Select ˝Error history˝ with the F1 or F2 button, and press the [SELECT] button.
OCH800A_137
A
button to set the mode number B.
2=2 beeps (1 second each)
3=3 beeps (1 second each)
B
button to change the setting number C.
C
n u
F3 F4
ON
OFF
button.
button.
button.