Wimius P64 - Video Projector Manual

PACKAGE LIST

PROJECTOR SPECIFICATIONS

PRODUCT STRUCTURE

1. Power
2. Arrow Keys
3. Confirm
4. Back
5. Manual Focus +
6. Manual Focus -
7. USB Ports
8. USB Ports
9. HDMI Ports
10. HDMI Ports
11. AV Ports
12. 3.5mm Headphone jack
13. Infrared signal receiving window
14. Anti-Dust Mesh
    (Regular Cleaning Recommended)

Remote Control

1. Power
2. Home
3. Arrow keys
4. Menu
5. Pause the tape
6. Volume +
7. Volume -
8. Mute
9. Setting
10. Confirmation key
11. Back
12. Focus +
13. Focus -
14. Source

Note:

1. Install 2 pieces of AAA batteries (not included) into the remote before using it, do not combine new batteries with old ones in the remote control, which can cause operation failure due to insufficient power supply.
2. When using the remote control, please make sure that the signal transmitter of the remote control aims at the infrared signal of the projector.
3. When you are not using the remote control for a long period. Please take out the batteries to prevent them from leakage.

INSTALLATION

Installation Method

The projector can be hanged on the ceiling with special hanger frame, and placed on the stable desk to project the image according to the operating environment and requirements. In addition, the projector can be installed with the following methods:

1. Front projection Ceiling mount
   
2. Rear projection Ceiling mount
   
3. Front projection Desk mount
   
4. Rear projection Desk mount
   

Keep the projector at a height where its lens is axial symmetry to the screen. If this is not possible, use the keystone correction function to adjust the projection image.

Projection Distance and Size

*The image size depends on the distance between projector and screen. there may be 3% measure difference among above listed data.
*The recommended projection distance is 2.5-3m.
*Ambient darkness will improve the clarity of the projected images.

Install on the Ceiling

Keep the projector vertical and towards the mid of the projector screen, and keep the projection image flat on the screen.

1. To adjust the tilt base, unscrew the support rod at the bottom of the projector, see the below picture.
2. For the Ceiling mount, there are 4 holes at the bottom of the projector (M4*10mm). Please slowly unscrew the 4 black rubbers, and then you can find the holes for the ceiling mount, see the below picture.
   

NOTE: The hanging bracket or ceiling mount stand is not packaged.

STARTING PROJECTOR

1. Remove the lens cap, connect the projector to the power through the power supply cable, and press the power key on the remote or projector, it starts working.;
2. Use the Automatic or Electronic keystone/ focus function of the projector to get a rectangle and clear image;
3. Adjust the focus button"F+" "F-" on the projector or the remote to get the best image performance; (If it is still blurry, please try to adjust the projection distance.)
4. Connect the external device (Smartphone, iPod, Fire Stick, TV box, DVD player, PC, etc.in the corresponding interfaces of the projector, please be sure to select the corresponding source. If you do not select the correct source, the projector will not be able to detect the signal)
5. SeIect the " " menu, enter the (Language Settings), and then you can set your preferred language.

PROJECTION IMAGE SETTINGS

Projection Mode

Select the [projection image settings] menu - select the [projection setting option] select the [Install Mode], Press the arrow key to select and press "OK" to confirm the projection position.

ManuaI Keystone Correction

Four-point Keystone

Select the [Projection Image Settings] menu - Select the [Four Point Keystone] Option, Just click "OK" button to pick the point you want to adjust at first, and then press the button "" or "" to set the value (Horizontal and Vertical 0 ~ 100) needed as shown below.
Reset: Press "", and the image will restore to the original keystone correction settings.

Horizontal and Vertical Keystone

Select the [Projection mage Settings] menu - Select the Horizontal or Vertical Keystone Option to adjust the screen horizontally or vertically ±30° with the arrow keys until the guides are adjusted to a rectangle.

Auto Keystone Correction and Focus

Please place the projector horizontally face to the wall first, Select the [Projection Image Settings] menu - turn on the [Omnidirectional Automatic Correction] or [Auto Focus] option, then it will automatically focus the picture based on the projection distance from the screen and adjust the picture to a rectangle when you change the projection angle.
If the picture is blurry, press repeatedly the focus button "F+" on the remote control to adjust the lens focus, tap or long-press the adjustment button until the picture is clear (There is no need to press the OK button after the screen is clear).
Note: The side projection angle of the projector should not exceed 200, otherwise the automatic keystone correction function may not work.

Zoom Setting

GO to the home page - select the [] menu - select the [Projection Image Settings] - select the [Zoom] option, the projection screen can be zoomed 50%~100%. Press the button "" to set the value needed as shown below.

SETTING UP THE PROJECTOR

Select The Input Signal Source

Select the desired input signal source (HDMll/HDM12/AV) on the home page, or you can press the "S" button on the remote control to select the corresponding signal source, For USB devices, no need to choose the signal source. The machine will detect them automatically.
When playing a video, you can press the menu button "", then set the aspect ratio of the image and other playback modes.

Connecting with Smartphones and iPad

Warming Tips:

1. The fluency of screen mirroring with a wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using a wireless connection. A distance of 1 meter is recommended.
3. Some Android devices may not support screen mirroring due to the compatibility.
4. Any questions, please feel free to email WiMilUS via support01@wimius.com.

WiFi Settings
Select the settings icon in the upper right corner of the main interface, and then press the "OK" key on the remote control to enter the settings interface and select "WiFi Settings".

For IOS System (Airplay)

Setting with Home Wi-Fi
Attention: Your device and the projector should be in the same Home WiFi.

1. Turn on the WiFi Setting of the projector.
2. Choose your Home WiFi to connect and enter the right password, then click "Done" to Connect, please wait 3-5 seconds to establish the connection. once connected, it will remember the password of the connected WiFi.
3. Turn on the WiFi setting of your mobile device, then connect it to the same Home WiFi as the projector.
4. Then click "Airplay" as the Input Source of your projector.
   
5. Swipe up the screen of your iOS mobile device and tap "Screen Mirroring" to search for the projector, then select"WiMiUS-P64 projector"from the searching results to connect.
6. Succeed.
   

For Android System(Miracast)

To activate this function, your android device must support Multi-screen/ Wireless Display. The name of "Multi-screen" may vary depending on various brands of Android devices.
Setting with mobile internet

1. Turn on the projector, and select "Miracast" as the Input Source.
   
2. Turn on the "Multi-screen/ Wireless Display" of your Android device.
3. Select "WiMilJS-P64 Projector" from the search results to connect.
4. Succeed.

Notes: If you want to connect it to your home wifi, just repeat the steps of the IOS system and select Miracast.

1. On your Android device, turn on WLAN (not necessary to connect to any Wi-Fi router)
2. Launch the Multi-screen/ Wireless Display/ Screen Mirroring/ Smart View function
3. Select Please waiting from the searching result list: WiMiUS-P64-Projector

BIuetooth Settings

Connect Bluetooth Speakers

1. Turn on your Bluetooth Speaker.
2. Turn on the [Bluetooth Settings] of your projector and select [add accessory].
3. Select your Bluetooth speaker to connect.
4. Succeed.
   

Note:

1. This step is only applicable to connecting the Bluetooth speaker but not to mobile phone Bluetooth.
2. The P64 projector is compatible with most Bluetooth headsets, Bluetooth speakers and Airpods, but not the Bluetooth keyboards.
3. If you have any questions, please feel free to email WiMiUS via: support01@wimius.com.

Connect Phone Bluetooth

1. Enter the Soundbar option in the main interface, the following interface will be displayed.
   
2. Turn on the Bluetooth of your phone and connect the Bluetooth of the projector named "WiMiUS-P64 Projector".
   
3. Then the projector can play mobile phone music.

SIGNAL LINES CONNECTION

WiMiUS P64 projector has 6 interfaces, HDMI ports*2/USB ports*2/3.5mm headphone output/ AV output. Please select the correct connecting port to connect your device (PC, Phone, DVD Player, Sound bar, USB, PS4,etc.)

USB Multimedia Connecting

For the USB devices, no need to choose the signal source. The machine will detect them automatically.

• Select the required category "movie", "music", "photo" or "Office Suite" in the main interface, and press the "OK" key on the remote control to enter the corresponding category.
• According to the programs to choose: "photos", "music", "movie" or "Office Suite".
• Choose the file you want to play, and press the key "OK" to play or pause the file. (You cannot enter the required category without connecting a USB disk.)

Note: For the "Office Suite" option, you can play, and demo PPT files.

Connecting with PC

• Connect the projector to the PC by HDMI cable.
• Choose the media signal channel: "HDMI"

Connecting with MacBook or Mac Book Air

Choose the media signal channel: "HDMI"

• Use a Type-C to HDMI adapter to connect your MacBook, or a Mini Display to HDMI adapter to connect with your Macaook Air (adapter not included).

Connecting with the Sound bar

• Use the 35mm audio cable coming with the projector to connect with the sound bar.
  
• Turn on the projector and the sound bar (choose AUX mode).
• More details, please contact the seller at support01@wimius.com.

Connecting with DVD

Use the 3-in-1 AV cable in the package

• Turn on your DVD player and the projector;
• Connect the colourful female connectors to your DVD player's RCA cable with the 3-in-1 AV cable in the package;
• Connect the black connector to the AV port of the projector, and enter the home page to select [AV] as the signal source.

Or connect to the DVD Player with the HDMI cable in the package.

Connecting with fire TV Stick

Plug the TV stick into the HDMI port of the projector.

• Choose the media signal channel:"HDMI"
• P.S.: It only supports a 1080P TV sticks, not a 4K TV sticks.

Connecting with XBOX/PS4

• Choose the media signal channel: "HDMI"
• Use HDMI cable to connect to XBOX/ PS4

MAIN MENU FUNCTION

Projection Image Setting

System Local Update

0ther Settings

About

FAQ

1. The remote control does not communicate with the projector.
   1. The power switch at the back of the projector is turned on or off?
   2. The remote control's batteries are depleted?
   3. Something obstructing the signal between the remote and IR
2. NO image on the screen.
   1. Is the channel set up correct?
   2. Is there an input signal?
   3. Is the input cable plugged well?
   4. Under PC mode, is the refresh rate > 75KHz?
3. Blue screen, no picture, no sound.
   Input cables are connected right?
4. Picture right, no sound.
   1. Input cables connected right?
   2. Volume at min or on Mute.
   3. Turn off the AC3/Dolby sound and set it to stereo sound.
5. Can't play the movies.
   1. The format of the video is right?
   2. Files are broken?
   3. Device is broken?
6. Can't play video in App Netflix, Hulu, Amazon Prime
   Those APPS are limited with HDCP. This model doesn't support this function. So it can't support these APPS.
7. Can't find devices when connected with hard drive or flash drive.
   Check if the device is broken.
8. Auto-off after working for a while
   1. The projector ventilation is blocked or the voltage is not stable.
   2. Send a video to support01@wimius.com to check for you.
9. Not compatible with your bluetooth speaker?
   1. The projector may not compatible with some versions Bluetooth speakers of JBL.
   2. Contact our after-sales email at support01@wimius.com immediately and tell us the brand and model of your bluetooth speaker.
10. WiFi connection is not stable?
    1. Please check whether the network of your phone is well.
    2. Make the distance between the phone and the projector within 1 meter.

TIPS

1. DO not place the projector in too warm or too cold a room, because the high temperature or low temperature will shorten the lifespan of the device. The working environment would be 50C-350C better.
2. 1f there are black spots on the projection screen, please don't worry, please contact support01@wimius.com via email, and we can send you a video about how to remove the dust.
3. The ventilation is equipped for the projector to work stably. Don't cover the vent with cloth, blanket or other things. Don't insert anything into the slit of the projector, or it may produce a short circuit or an electric shock to your device and cause damage.
4. The projector shall be strictly protected from strong impact, extrusion and vibration. Do not try to move and on strong impact, extrusion and vibration. Do not try to move and the internal circuit faults.
5. Lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with a soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.

If you have any issues, email your country code, order number and the problem (For Example: US+P64+No Voice) to support01@wimius.com. We will provide a fast solution within 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no sound, Bluetooth connection failed, WiFi connection failed, dark spots, choppy animation etc. We promise all the projectors have been 100% carefully checked and packaged before shipping.
If you have any questions, could you please contact us so that the problem can be solved. And give us an opportunity to improve. We guarantee we will provide you with a satisfactory solution.
Thanks for your understanding!
WiMiUS Service Team