Siemens SIMATIC S7-1500 System Manual page 352

Technical data
17.2 Standards and Approvals
cULus approval
Underwriters Laboratories Inc. in accordance with
• UL 508 (Industrial Control Equipment)
RCM (C-Tick) Declaration of conformity for Australia/New Zealand
The device fulfills the requirements of standard AS/NZS CISPR 16.
Korea Certification
KC registration number: R-R-S7M-SimaticDC
Please note that this device corresponds to limit value class A in terms of the emission of
radio frequency interference. This device can be used in all areas, except residential areas.
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며
가정 외의 지역에서 사용하는 것을 목적으로 합니다.
The EMC limits for Korea correspond to the limits of the EMC product standard for variable-
speed electrical drives EN 61800-3 of the category C2 or the limit class A, group 1 to EN
55011. The limits to category C2 or limit class A, group 1, are maintained with adequate
additional measures. Additional measures, such as the use of an additional radio interference
suppression filter (EMC filter), may be necessary.
Measures for an appropriate EMC-compliant setup of the plant are also described in detail in
this manual and in the Configuration Manual EMC installation guidelines
(https://support.industry.siemens.com/cs/ww/en/view/60612658).
Please note that it is ultimately the label on the device that determines the compliance with
standards.
Marking for the Eurasian Customs Union
EAC (Eurasian Conformity)
Customs Union of Russia, Belarus and Kazakhstan
Declaration of conformity with the technical requirements of the Customs Union (TR CU).
China RoHS
The SIMATIC Drive Controllers comply with the China RoHS directive. Additional information
can be found on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109775373).
350
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD