Technical Data; Introduction; Standards And Approvals - Siemens SIMATIC S7-1500 System Manual

Technical data

17.1

Introduction

System data
This section sets out general technical data for a system comprising the SIMATIC Drive
Controller and components of the S120 drive system (Booksize). You can find detailed
technical data for individual system components in the relevant manuals.
Technical data of the SIMATIC Drive Controller
You can find the technical data for the SIMATIC Drive Controller in the SIMATIC Drive
Controller manual.
17.2

Standards and Approvals

Currently valid markings and authorizations
Note
Information on the system components
The markings and approvals currently valid are printed on the system components.
EU Declaration of Conformity
Our products fulfill the requirements and safety objectives of the following EC Directives and
comply with the harmonized European standards (EN):
The EU Declaration of Conformity is available on the Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/25715/cert) website.
UK Declaration of Conformity
The SIMATIC Drive Controller complies with the designated British Standards (BS) published in
the official consolidated list of the British Government.
The UK Declaration of Conformity is also available on the Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/25715/cert) website.
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD
17
349