HP 8340B Manual page 200

8-9.
Test Menu Utility Softkey
Description
The test menu [Utility] softkey gives you
the capability of:
•
Changing the synthesizer's defined
option configuration (option configuration defined by the
cal
constants) from your computer,
•
Displaying data from previously
run tests, or
•
Displaying
the test status of previously tested instruments.
Use the change
option feature to simplify instrument reconfiguration after you add or delete
an
instrument option.
Test Equipment
None Required.
Procedure
1.
After
you
select the test
menu [Utility] softkey, the program displays the following softkey
choices:
[Chg Option]
lets you change the synthesizer's defined option configuration.
After
you select this softkey, input
each of the synthesizer's three-digit option strings (one at
a
time), pressing
[ENTER] after
each entry. After you have input the options, check the option
list.
When the option entry
is complete,, the program automatically updates the calibration constants
in
the synthesizer, and the data file on the data disc, to reflect the option configuration you
entered.
[Dsp Data] lets you display or print the test data from previously run tests (see the
NOTE
below).
The data displayed
is
for the instrument
whose
serial
number
is
currently
in the
computer's
memory, and for the type of testing
you selected while in the
TEST SELECTION
menu (either the
attenuator calibration or the operation
verification).
When
you select this softkey, the program displays the test menu
and lets you output
all the test
data ([ALL DATA]), output
the data for one test
([SELECT]), or
return to the
UTILITIES
menu
([EXIT]).
The
[SELECT]
softkey outputs the data for the test at which the cursor points. Use the keyboards
UP or DOWN arrow keys or the front panel knob on the keyboard to position the cursor.
[Prt Status]
lets you
display or print the test status for the synthesizer
whose
serial number is
currently in
the computer's memory. The
status displayed is
for the type of testing you selected
while in the
TEST SELECTION
menu (attenuator calibration or operation verification).
[Exit]
returns to
the test menu.
Attenuator Calibration and Operation Verification Test
Software Tests/Utilities 8-13