HP 8340B Manual page 171

Adapters:
APC 3.5 (f)
to
APC 3.5 (f) (2 required)
....................
HP P/N 5061-5311
APC 3.5 (f) to Type
N
(m)
...............................
HP P/N 1250-1744
APC 3.5 (f)
to
Type
N (f)3
...............................
HP P/N 1250-1745
SMA (m) to BNC
(f).
....................................
HP P/N 1250-1200
Type
N
(m) to BNC (f)2
.................................
HP P/N 1250-0780
Cables:
Semi-rigid coax, SMA(m) to SMA (m)
....................
HP P/N
08340-20125
BNC (m)
to
BNC (m) (7
required)
.........................
HP
P/N 8120-1840
3.5
inch Diskettes
(Box of
10)4
...................................
HP 92192A
or HP 91290A
In addition,
a
minimum of
5
HP-IB cables will be
required to run the tests (includes connection
to
disc drive and
printer).
1 Required (or the Attenuator Calibration Tests only
2
Required for the Operation Verification Tests only
3
Required for testing
an
HP 8340A/B
only
4
Required tor measurement data storage
HP 92192A:
3.5
inch,
double-sided
microfloppies; HP 91290A 5 25
Inch floppies
5 Both the option 001 (no attenuator) and the option H01 (high power, with attenuator) provide the
power required
to drive the
mixer used in
the performance tests The option H01
is
the
microwave
source used
in
Hewlett-Packard's
field service
organization's standard microwave test station (microwave work station)
Attenuator Calibration and Operation Verification Test Software
Required Test Equipment
2-3/2-4