Table of Contents
Advertisement
Remove the protective film from
3
the bottle and extend the hose.
Remove the air release cap
from the hose.
Attach the sticker enclosed with the
bottle on the specified locations.
(See step
.)
9
You will use the air release cap
again. Therefore keep it in a safe
place.
Connect the hose to the valve.
4
Screw the end of the hose clock-
wise as far as possible.
Make sure that the compressor
5
switch is off.
Open the cover and remove the
6
power plug from the compres-
sor.
7-2. Steps to take in an emergency
399
7
Advertisement
Table of Contents
