System check display
■
After switching the power switch to ON mode, system operation is checked.
When the system check is complete, the normal screen will return.
When driving on snowy roads or in other bright environments
■
When the highest level of brightness has been reached, the display can be
made even brighter by pressing and holding "" on the brightness control but-
ton.
Pressing "" on the brightness control button or turning the power switch off
will cause the brightness level to revert to the original level.
Head-up display
■
The head-up display may seem dark and hard to see when viewed through
●
sunglasses, especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
When the head-up display is turned off, it will remain off even if the power
●
switch is turned to ON mode after the power switch has been turned off.
When the 12-volt battery is disconnected
■
The head-up display settings will be reset.
WARNING
Before using the head-up display
■
Check that the position and brightness of the head-up display image does
not interfere with safe driving. Incorrect adjustment of the image's position
or brightness may obstruct the driver's view and lead to an accident, result-
ing in death or serious injury.
NOTICE
To prevent damage to the components
■
If an object falls into the opening of the
head-up display, remove it immediately.
Also, avoid spilling water or other liquids
near the head-up display opening as this
may cause mechanical damage.
2. Instrument cluster
107
2