Table of Contents
Advertisement
336
6-3. Do-it-yourself maintenance
Replace the light bulb, and
5
set the connector.
Install the bulb base.
6
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn the bulb base clockwise to
set.
Shake the bulb base gently to
check that it is not loose, turn
the headlight high beams on
once and visually confirm that
no light is leaking through the
mounting.
Install the cover and turn it
7
clockwise.
Align the
positioning mark of the light unit
and insert and turn it.
There is the positioning mark on
the outer side of the light unit.
of the cover to the
Advertisement
Table of Contents
