Sensor Module Cabinet Smc30; Sensor Module Cabinet Smc40 - Siemens Sinamics s120 Commissioning Manual

Diagnostics
4.1 Diagnostics via LEDs
4.1.3.3

Sensor Module Cabinet SMC30

Table 4- 35 Meaning of LEDs on the Sensor Module Cabinet SMC30
LED Color
RDY –
READY
Green
Orange
Red
Green/red
Green/red
Green/
orange
or
Red/orange
OUT > 5 –
V
Orange
The parameters for activating component recognition using LEDs can be taken from the following reference:
1)
Reference: /LH1/ SINAMICS S120/S150 List Manual
4.1.3.4

Sensor Module Cabinet SMC40

Table 4- 36 Meaning of the LEDs on the Sensor Module Cabinet-Mounted SMC40
LED Color Status
RDY – Off
READY
Green Continuous
light
Orange Continuous
light
Red Continuous
light
328
Status Description, cause
Off The electronics power supply is missing or outside the per-
missible tolerance range.
Continu- The component is ready for operation. Cyclic DRIVE-CLiQ
ous light communication is taking place.
Continu- DRIVE-CLiQ communication is being established.
ous light
Continu- This component has at least one fault.
ous light
Note:
LED is controlled irrespective of the corresponding messag-
es being reconfigured.
Flashing Firmware is being downloaded.
light 0.5
Hz
Flashing Firmware download is complete. The system waits for
light 2 Hz POWER ON.
Flashing Component recognition via LED is activated
light
Note:
Both options depend on the LED status when component
recognition is activated.
Off The electronic power supply is missing or outside permissi-
ble tolerance range.
Power supply ≤ 5 V.
Continu- The electronics power supply for the encoder system is
ous light available.
Power supply > 5 V
Description, cause
The electronics power supply is missing or outside the per-
missible tolerance range.
The component is ready for operation. Cyclic DRIVE-CLiQ
communication is taking place.
DRIVE-CLiQ communication is being established.
This component has at least one fault.
Note:
LED is controlled irrespective of the corresponding messag-
es being reconfigured.
.
1)
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
Remedy
–
–
–
Remedy and
acknowledge fault
–
Carry out a POWER
ON
–
–
–
Remedy
–
–
–
Remove and
acknowledge the fault.