Siemens Sinamics s120 Commissioning Manual page 295

Name
Unplug while voltage is
present
Actuating keys
Overview of important parameters (see SINAMICS S120/S150 List Manual)
All drive objects
• p0005[0...1]
• p0006
• p0013[0...49]
• p0971
Drive object, Control Unit
• r0002
• p0003
• p0004
• p0007
• p0008
• p0009
• p0011
• p0012
• r0019.0...14
• p0977
Other drive objects (e.g. SERVO, VECTOR, X_INF, TM41 etc.)
• p0010
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
Description
The BOP can be withdrawn and inserted under voltage.
The ON key and OFF key have a function.
•
When withdrawing, the drives are stopped.
After inserting, the drives must be switched on again.
The ON key and OFF key have no function.
•
Withdrawing and inserting has no effect on the drives.
The following applies to the "P" and "FN" keys:
When used in a combination with another key, "P" or "FN" must be pressed first and then
•
the other key.
BOP status display selection
BOP status display mode
BOP user-defined list
Save drive object parameters
Control Unit status display
BOP access level
BOP display filter
BOP backlighting
BOP drive object after powering up
Device commissioning parameter filter
BOP password input (p0013)
BOP password confirmation (p0013)
CO/BO: Control word, BOP
Save all parameters
Drive, commissioning parameter filter
3.22 Basic Operator Panel 20 (BOP20)
Commissioning
295