Independence Of Language - Siemens SINUMERIK 840D Programming Manual

General
1
1.4 Cycle support in program editor (SW 4.3 and later)

1.4.7 Independence of language

Explanation
Cycle support files can also be configured as
language-independent.
This is done by replacing all the texts in the cov.com
and sc.com files by text numbers. In addition, a text
file is also required in the control.
The aluc.txt file with text number range
85000...89899 is reserved for user cycles.
This file is named aluc_(language).com in the MMC
103 and stored in directory DA\MB.DIR (MBDDE
alarm texts) in the file system.
Example:
//C60 (DRILLING CYCLE)
(R///$85000)[$85001/PAR1]
(R///$85002 $85003)[$85002/PAR2]
...
Relevant text file:
85000
85001
85002
85003
Explanation of the syntax:
$
85000...89899
$85000... $...
1-36
0 0
0 0
0 0
0 0
Identifier for text numbers
Text number for user cycles
Several texts are concatenated
"Retraction plane as absolute value"
"Retraction plane"
"Drilling depth"
"Relative to return plane"
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide, Cycles (PGZ) - 04.00 Edition
12.97
1
05.98
 Siemens AG 2000 All rights reserved.