General
1
1.1 General information
1.1
General information
The first section provides you with an overview of the
available cycles. The following sections describe the
general conditions that apply to all cycles regarding
• programming the cycles and
• operator guidance for calling the cycles.
1.2
Overview of cycles
Cycles are generally applicable technology
subroutines with which you can implement specific
machining operations such as tapping a thread or
milling a pocket. These cycles are adapted to
individual tasks by parameter assignment.
The system provides you with various standard
cycles for the technologies
• Drilling
• Milling
• Turning.
1-16
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide, Cycles (PGZ) - 04.00 Edition
12.97
1
Siemens AG 2000 All rights reserved.