Table of Contents
Advertisement
From the preceding page
A ladder circuit can be created on each page from 0 to 7 consisting of 4 rows, each of which has
8 terminals and 1 output relay. Therefore, a ladder circuit can be created that consist of 32 rows
in all (one row contains 8 terminals and 1 output relay).
Calculations will be carried out in the order of the page numbers 0, 1, 2, 3, 4, 5, 6 and 7.
Page 0
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
(2) Ladder circuit creation 1 (setting input signals)
[RESULTS OUTPUT]
1PAGE.NO.
2SET POSITION
1
3INPUT SIGNAL
2
4LOGICAL SYMBOL
3
5OUTPUT SIGNAL
6UPPER MENU
[PAGE0]
INPUT0
LOGIC
INPUT1
LOGIC
INPUT2
LOGIC
INPUT3
LOGIC
1. Move the cursor to item 2 SET POSITION with the up and down keys, and press the SET key.
- The ladder circuit cursor can be moved with the up, down, left and right keys. Move the cursor
to the position where you want to place an input terminal, and press the SET key.
2. Move the cursor to item 3 INPUT SIGNAL with the up and down keys, and press the SET key.
- Set the kind of input signal and its number.
- After moving the cursor to the kind of input signal you want, select a number with the up and
down keys, and press the ESC key.
Continued on the following page
Input 0
Input 1
Input 2
Input 3
(TYPE00)
(0~7) REG.NO YES
MOVE
AUXRLY C112(0~127) EXT-INP X0(0~6)
TMR TM0(0~7) CNT CN0(0~7)
AN00(0~15) OUT Y00(0~15)
OUT Y00(0~15) AUXRLY C000(0~127)
TMR TM0(0~7) SET-VL000(000~999)
CNT CN0(0~7) SET-VL000(000~999)
DEL.
0
1
2
3
4
5
10-9
DEL.
6
7
OUT
PC Function
Output
2
Ladder circuit cursor
10
Advertisement
Table of Contents
