Table of Contents
Advertisement
PC Function
[2] Procedure for creating the final output conditions in a ladder circuit
A ladder circuit can be created for each object type (0 to 15) using the following procedure.
(1) Operation to invoke the [FINAL OUTPUT COND.] menu
On the MAIN OPS MENU, move the cursor to SET-SCRN item, and press the SET key.
1. Move the cursor to item r FINAL OUTPUT COND with the up and down keys, and press the
SET key.
-
2. After moving the cursor to item 1 PAGE NO. (register number) with the up and down keys,
and pressing the SET key, specify page number "0" with the up and down keys, set the REG.
(register) item to YES with the left and right keys, and press the SET key.
will be displayed.
10
Continued on the following page
- On the [SYSTEM SETUP] menu, move the cursor to item 2 OBJECT TYPE COND
and press the SET key.
[OBJECT TYPE COND]
1OBJECT TYPE NO.
2EDIT
3TITLE REGISTRATION (TO NEXT SUB-MENU)
4MEAS.0, CAMERA1
5POS. ADJ.CAMERA1
6MEAS.0, CAMERA2
7POS. ADJ.CAMERA2
8SELECT CAMERA IMG NO CAM1 CAM1 CAM1&2
0MEASUREMENT 1
qMEASUREMENT 2
wMEASUREMENT 3
eFINAL CALC RESULT
rFINAL OUTPUT COND (TO NEXT SUB-MENU)
1
tSYSTEM-IN/OUT
yHALT MEAS ON NG
uUPPER MENU
The [RESULTS OUTPUT] menu will be displayed.
[RESULTS OUTPUT]
2
1PAGE.NO.
2SET POSITION
3INPUT SIGNAL
4LOGICAL SYMBOL
5OUTPUT SIGNAL
6UPPER MENU
[PAGE0]
INPUT0
LOGIC
INPUT1
Row No.
LOGIC
INPUT2
LOGIC
INPUT3
LOGIC
00(0~15)
COPY(
TYPE00) INITIALIZE
NO (TO NEXT SUB-MENU)
NO ADJ. [REG. 0-1PNTSXY
NO (TO NEXT SUB-MENU)
NO ADJ. [REG. 0-1PNTSXY
NO (TO NEXT SUB-MENU)
NO (TO NEXT SUB-MENU)
NO (TO NEXT SUB-MENU)
(TO NEXT SUB-MENU)
(TO NEXT SUB-MENU)
NO YES
(TYPE00)
(0~7) REG.NO YES
MOVE
AUXRLY C112(0~127) EXT-INP X0(0~6)
TMR TM0(0~7) CNT CN0(0~7)
AN00(0~15) OUT Y00(0~15)
OUT Y00(0~15) AUXRLY C000(0~127)
TMR TM0(0~7) SET-VL000(000~999)
CNT CN0(0~7) SET-VL000(000~999)
DEL.
0
1
2
3
4
5
10-8
-
Items 2 to 5
DEL.
Column No.
6
7
OUT
Ladder circuit
display area
2
Advertisement
Table of Contents
