Table of Contents
Advertisement
Shared settings
From the previous page
After selecting item t SYSTEM-IN/OUT, on the [OBJECT TYPE COND] (conditions of object type) menu.
When the selected camera is either CAM1 or CAM2
[OBJECT TYPE I/O]
1MONITOR LIGHT LVL CAM1(1~2) NO YES
3TRIGGER CCD START REG: NO YES(BIN AVG-LIT-LVL)
5COMPUTER LINK OUT BLOCK-00(MESR-0 CAM-1)
6SHUTTER SPEED
7STORE REF IMAGE
1
8UPPER MENU
5
1.Use the up and down keys to set item 7 STORE REF IMAGE, (reference images for
comparison between images) for comparison between images.
2.Display an image by pressing the SEL key. Then focus the lens and adjust the camera's iris to
adjust the image.
- After adjusting the image, press the SEL key to freeze the frame.
3.Creating the window for the reference image.
- Select one of the following: MOVE, UP.L, or LO.R. Then adjust the window to suit your
4.When the position of the image window has been defined, record the selection by using the left
and right keys to go to REG. (register). Then press SET key.
- Using the left and right keys, go to DISP (display) and then press SET to display the image
9
5.After pressing the ESC key, move the cursor to item 8 UPPER MENU with up and down keys,
and press the SET key.
- This will return you to the [OBJECT TYPE COND] (conditions of object type) menu.
When the selected camera is CAM 1&2
[OBJECT TYPE I/O]
1MONITOR LIGHT LVL CAM1(1~2) NO YES
3TRIGGER CCD START REG: NO YES(BIN AVG-LIT-LVL)
5COMPUTER LINK OUT BLOCK-00(MESR-0 CAM-1)
6SHUTTER SPEED
7STORE REF IMAGE
1
8UPPER MENU
4
1.Use the up and down keys to set item 7 SET IMAGE WINDOWS (area setting) for
comparison between images.
2.Display an image by pressing the SEL key. Then focus the lens and adjust the camera's iris to
adjust the image.
3.Select the area of the image to be used.
- Select one of the following: MOVE/UP.L/LO.R and then define the area.
4.Press the ESC key, move the cursor to item 8 UPPER MENU with up and down keys, and
press the SET key.
- This will return you to the [OBJECT TYPE COND] (conditions of object type) menu.
Continued on the following page
&SERIAL OUTPUT
1/00060(1/30~1/10000)
MOVE UP.L(224,208)
needs.
Decide on the position of the window for the reference image before every operation and
then press the SET key.
in the bottom right hand corner of the screen. When you have finished checking your
selection, press the ESC key to exit.
&SERIAL OUTPUT
1/00060(1/30~1/10000)
MOVE UP.L(224,208)
Define the position of the window to be used with the reference image and then press the
SET key.
LO.R(287,271 REG. DISP
3
4
LO.R(287,271
3
9-26
Advertisement
Table of Contents
