Yamaha MCX-2000 Owner's Manual page 92

Setting Date and Time Manually
1 Select Top Menu> Setup> Date/Time> Manual Setup.
to use an NTP ser,/cr (Or-·j) in
t~~e
/-\uto screen,
setup is ck:;abied, (You '.vili see an ale1 rnessa~:j8 so.}
2 Change each parameter value as needed~ and specify
the current date and tinle.
GVear
;\vailable values:
2005~~2030
(factory settng: 20(5)
G
Month
,bwailable values: 1-·12 (factory setting: 1)
Day
Available
values:
1,-31
(factory setting:
1)
o
Hour
Available values: 0/12 Ai\,1
~~
11
?A~.
0/12
Pivl ~~
'11 PM;
O~23
(factory setting: 0
Aiv1;
12-hour
c10ck
for US and Canada
rrlodels, 0; 24-hour clock for otr18r rnodels)
e
Minute
Available values: 0-59 (factory setting: 0)
3 When you select OK, the ;:Saving...:, message is shown.
The MCX-2000 immediately resets its internal clock as
specified, and the result is soon reflected on each
MusicCAST client.
~JiI!Ii]
\:Vi"1en
:,!Ol..!
set the eJate in the order
of
year,
~T!onth
ami availar;ie
Day vaiues arewit"1in a
'~'eason3bie'
range for the Month,
if
,june fer' Montr1). t~1e rnaxirnun"J Day value becon"Jes
the
rTklXirnl.lfT1
Day value tJecornes "28"
If set each elate v<=/ue at
can even specify June 31, inCOiTect date settinqs
,~
.•._.- _ ' _.... _ _1·
into the COtTen ones after saving operation, June 31
1, In addition, the Hour va!ues change in
12
·iYJur O!"
clod, (plus. 0 er 12 for
noon dnd
acconjing to the Time [Yspii3.Y format.
92
~",~CX.-20DO ()v.;ner's fVlonuol
Selecting the Time Display
1 Select Top Menu> Setup> Date/Tirne
>
Time Display.
2 Change each parameter value as needed.
024 or 12 hours
Se!ect either ·12·-hour or 24··hour ciock for the tilTle d!splay
(factory setting: '12). 'vVl'len "'12" is spedfied! the next pararneter
becon-les avaHabie.
Noon & Midnight
Select either 00:00 or 12:00 for noon an(j n'iidnight (factory
setting: 00:00).
3 When you select OK, the :·Saving ..." message is shown.
The specified format is immediately applied to the time
display on the MCX-2000 and each MusicCAST client
Setting Date and Time Manually
1 Select Top Menu> Setup> Date/Time> Manual Setup.
to use an NTP ser,/cr (Or-·j) in
t~~e
/-\uto screen,
setup is ck:;abied, (You '.vili see an ale1 rnessa~:j8 so.}
2 Change each parameter value as needed~ and specify
the current date and tinle.
GVear
;\vailable values:
2005~~2030
(factory settng: 20(5)
G
Month
,bwailable values: 1-·12 (factory setting: 1)
Day
Available
values:
1,-31
(factory setting:
1)
o
Hour
Available values: 0/12 Ai\,1
~~
11
?A~.
0/12
Pivl ~~
'11 PM;
O~23
(factory setting: 0
Aiv1;
12-hour
c10ck
for US and Canada
rrlodels, 0; 24-hour clock for otr18r rnodels)
e
Minute
Available values: 0-59 (factory setting: 0)
3 When you select OK, the ;:Saving...:, message is shown.
The MCX-2000 immediately resets its internal clock as
specified, and the result is soon reflected on each
MusicCAST client.
~JiI!Ii]
\:Vi"1en
:,!Ol..!
set the eJate in the order
of
year,
~T!onth
ami availar;ie
Day vaiues arewit"1in a
'~'eason3bie'
range for the Month,
if
,june fer' Montr1). t~1e rnaxirnun"J Day value becon"Jes
the
rTklXirnl.lfT1
Day value tJecornes "28"
If set each elate v<=/ue at
can even specify June 31, inCOiTect date settinqs
,~
.•._.- _ ' _.... _ _1·
into the COtTen ones after saving operation, June 31
1, In addition, the Hour va!ues change in
12
·iYJur O!"
clod, (plus. 0 er 12 for
noon dnd
acconjing to the Time [Yspii3.Y format.
92
~",~CX.-20DO ()v.;ner's fVlonuol
Selecting the Time Display
1 Select Top Menu> Setup> Date/Tirne
>
Time Display.
2 Change each parameter value as needed.
024 or 12 hours
Se!ect either ·12·-hour or 24··hour ciock for the tilTle d!splay
(factory setting: '12). 'vVl'len "'12" is spedfied! the next pararneter
becon-les avaHabie.
Noon & Midnight
Select either 00:00 or 12:00 for noon an(j n'iidnight (factory
setting: 00:00).
3 When you select OK, the :·Saving ..." message is shown.
The specified format is immediately applied to the time
display on the MCX-2000 and each MusicCAST client