Using The Off Timer Function; Using The Menu To Set The Off Timer; Function; Using Off Timer On The Remote Control - Yamaha MCX-2000 Owner's Manual

MusicCAST settings
Using the OFF Timer function
You can set the MusicCAST client to switch itself
off after a set period of time, which you can also
define. This function is called the OFF Timer. You
can use the ON and OFF timers simultaneously.
• Using the menu to set the OFF Timer
function
Carry out the following procedure to set the OFF
timer from the menu of your MusicCAST client.
4.
Use
A
I
v to select the time (in minutes)
for the MusicCAST to continue in the
power-on mode before switching itself
to the standby mode.
OFF
::::=
3~]r"lin
6[1r " lin
9[1r "
lin
121ap'Iin
5.
Press SELECT to confirm the setting.
The confirmation screen appears on the display.
•
1.
Press and hold MENU for two seconds
to return to the Top Menu screen.
6.
The display returns to the Setup screen
after a small delay, and the TIMER
indicator lights.
2.
Press OFF TIMER repeatedly to cycle
through the available settings.
The available OFF Timer settings are 30, 60,
90, 120 minutes, and OFF. Selecting any setting
other than OFF activates the OFF timer
function, and sets it to place the MusicCAST
client in sleep mode 30 - 120 minutes from the
time you activate it, depending on the setting
you select.
• Using OFF TIMER on the remote control
to set the OFF Timer
Carry out the following procedure to access the
OFF Timer function from any screen.
1.
Press OFFTIMER.
The OFF Timer screen appears on the display.
"lJl"OFF
3[1j"'lin
6[1r " lin
9~~lr"lin
12~]p'lin
'IJI"Pla'::l
~~I~ca 11 PI
.::t
l ::!
Ed i
t
Book
p'I,::ir'k
51~tup
Input
2.
Use
A
I v
to move the cursor to "Setup"
and press SELECT.
The Setup screen appears on the display.
3.
Use
A
I v to move the cursor to "OFF
Timer" and press SELECT.
The OFF Timer screen appears on the display.
3.
The OFF Timer screen disappears after a
small delay.
MusicCAST settings
Using the OFF Timer function
You can set the MusicCAST client to switch itself
off after a set period of time, which you can also
define. This function is called the OFF Timer. You
can use the ON and OFF timers simultaneously.
• Using the menu to set the OFF Timer
function
Carry out the following procedure to set the OFF
timer from the menu of your MusicCAST client.
4.
Use
A
I
v to select the time (in minutes)
for the MusicCAST to continue in the
power-on mode before switching itself
to the standby mode.
OFF
::::=
3~]r"lin
6[1r " lin
9[1r "
lin
121ap'Iin
5.
Press SELECT to confirm the setting.
The confirmation screen appears on the display.
•
1.
Press and hold MENU for two seconds
to return to the Top Menu screen.
6.
The display returns to the Setup screen
after a small delay, and the TIMER
indicator lights.
2.
Press OFF TIMER repeatedly to cycle
through the available settings.
The available OFF Timer settings are 30, 60,
90, 120 minutes, and OFF. Selecting any setting
other than OFF activates the OFF timer
function, and sets it to place the MusicCAST
client in sleep mode 30 - 120 minutes from the
time you activate it, depending on the setting
you select.
• Using OFF TIMER on the remote control
to set the OFF Timer
Carry out the following procedure to access the
OFF Timer function from any screen.
1.
Press OFFTIMER.
The OFF Timer screen appears on the display.
"lJl"OFF
3[1j"'lin
6[1r " lin
9~~lr"lin
12~]p'lin
'IJI"Pla'::l
~~I~ca 11 PI
.::t
l ::!
Ed i
t
Book
p'I,::ir'k
51~tup
Input
2.
Use
A
I v
to move the cursor to "Setup"
and press SELECT.
The Setup screen appears on the display.
3.
Use
A
I v to move the cursor to "OFF
Timer" and press SELECT.
The OFF Timer screen appears on the display.
3.
The OFF Timer screen disappears after a
small delay.