Yamaha MCX-2000 Owner's Manual page 10

G
ANALOG OUT jacks (stereo)
o
OPTICAL OUT jack (stereo)
;'~,udio
playback
si~jnals
on the MCX-2000 are output fron"", thpse jacks, Use the suppEed optical
di~Jital
cable (or one
!Jurcha~:~ed
separately) to connect the OPTICAL OUT
jac~\~
to a diQital audio input on an external device. Use the supplied stereo
p~n
car)le
(or one pLH'chased separately) to connect the
;\l'-JALOG OUT
jacks to analoQ audlo 1nput jacks on an external device.
o
ANALOG IN jacks (stereo)
G>
OPTICAL IN jack (stereo)
Audio sources caHed
i
external input' in this manual are
incomin(~
audio siqnals via these jacks. Use the supplied optical
di~1ital
cable (or the one purcrKlsed ;3eparately) to connect. tt,e OPTiCAL IN jack t.o a (fqital audio output on an external device. Use t.he
supplied stereo pin cable (or one
purchasf~d
separately) t.o connect the
A.NALOG 1N
jacks to ana!ofJ audio output jacks on an
ex.ternal device.
6)
REMOTE terminal
This terminal is designed for professlonal expansion purposes, not for COnSUriler use of the
rv1CX-2000.
e
10/100 indicator
G)
LINK/DATA indicator
G»
LAN {Ethernet} port
Connect a networl< cable (CAT-5 straight cable) to the Ethernet port \Vr,8n creating a wireci netvvork with clients or
connechl~l
t.he
MCX-2000
t.o your home network. The
Ul'-JK/OA"f,4
indicator !iflhtS up when the \lvired connection is properly \tvorking, and
rashes when data traffic ovor the network is beinQ done. The Ethernet port is automatlc8.lly confifJur'ed to match the speed of a
connected net\f\iork (10 or 100 Mbps); the 10/100 indicator Ughts up when t1""le Ethernet port is configured for 100 Mbps! and is
unlit for
10 rV1bps.
e
S-VIDEO port
o
VIDEO port
These ports output the fvlCX-2COO operating screen
disp~ays
(030) to an externa! T\/
rnon~tor.
Connect either port to your TV
1Ylonitor's video input (yellovJ-coded composite port for VIDEO, or 4-pln S port for S-VIDEO). The VIDEO and S-VIDEO ports
output the same displays.
10
MCX-2000 Ov.;ner's Monuoi
G
ANALOG OUT jacks (stereo)
o
OPTICAL OUT jack (stereo)
;'~,udio
playback
si~jnals
on the MCX-2000 are output fron"", thpse jacks, Use the suppEed optical
di~Jital
cable (or one
!Jurcha~:~ed
separately) to connect the OPTICAL OUT
jac~\~
to a diQital audio input on an external device. Use the supplied stereo
p~n
car)le
(or one pLH'chased separately) to connect the
;\l'-JALOG OUT
jacks to analoQ audlo 1nput jacks on an external device.
o
ANALOG IN jacks (stereo)
G>
OPTICAL IN jack (stereo)
Audio sources caHed
i
external input' in this manual are
incomin(~
audio siqnals via these jacks. Use the supplied optical
di~1ital
cable (or the one purcrKlsed ;3eparately) to connect. tt,e OPTiCAL IN jack t.o a (fqital audio output on an external device. Use t.he
supplied stereo pin cable (or one
purchasf~d
separately) t.o connect the
A.NALOG 1N
jacks to ana!ofJ audio output jacks on an
ex.ternal device.
6)
REMOTE terminal
This terminal is designed for professlonal expansion purposes, not for COnSUriler use of the
rv1CX-2000.
e
10/100 indicator
G)
LINK/DATA indicator
G»
LAN {Ethernet} port
Connect a networl< cable (CAT-5 straight cable) to the Ethernet port \Vr,8n creating a wireci netvvork with clients or
connechl~l
t.he
MCX-2000
t.o your home network. The
Ul'-JK/OA"f,4
indicator !iflhtS up when the \lvired connection is properly \tvorking, and
rashes when data traffic ovor the network is beinQ done. The Ethernet port is automatlc8.lly confifJur'ed to match the speed of a
connected net\f\iork (10 or 100 Mbps); the 10/100 indicator Ughts up when t1""le Ethernet port is configured for 100 Mbps! and is
unlit for
10 rV1bps.
e
S-VIDEO port
o
VIDEO port
These ports output the fvlCX-2COO operating screen
disp~ays
(030) to an externa! T\/
rnon~tor.
Connect either port to your TV
1Ylonitor's video input (yellovJ-coded composite port for VIDEO, or 4-pln S port for S-VIDEO). The VIDEO and S-VIDEO ports
output the same displays.
10
MCX-2000 Ov.;ner's Monuoi