Operating System; Battery Details; Battery Safety; Battery Swap Time - Motorola 7545MBW User Manual

Operating System

®
• Microsoft Windows

Battery Details

Omnii Hand-Held Computers are powered by a lithium-ion battery pack, Model ST3001.
Please see the following sections for detailed battery information:
• Installation: "Preparing the Omnii for Operation" on page
• Calibration and power settings:
• Chargers and docking stations:
• Specifications:
• Contact pinout:

Battery Safety

IMPORTANT

Battery Swap Time

Assuming the default power saving parameters and battery reserve level have not been altered, battery swap
time is a minimum of 4 minutes — you will not lose data if the battery is replaced within this time frame.
To protect data, the safest place to store data is on a microSD memory card or externally to the device on a
USB memory stick or on a PC. You can also save data in the "Flash Disk" partition of the file system.
Refer to "Suspend Threshold and Estimated Battery Backup" on page 3-45
power for data backup purposes.
The Suspend Threshold adjustment in the Power Properties tab allows you to determine the battery capacity at
which the Omnii will be shut down. If left at the default value, Maximum Operating Time, the unit will run until
the battery is completely empty; the RAM is only backed up for a short period of time. If you choose Maximum
Backup Time, the Omnii shuts off with more energy left in the battery so RAM can be backed up for a longer
period of time.
®
Embedded CE 6.0
"Power Properties" on page
Chapter 4:
"Lithium-ion Smart Battery 5000 mAh (ST3001)" on page
"Omnii Battery Contacts" on page
Before attempting to install, use, or charge the battery pack, it is crit-
ical that you review and follow the important safety guidelines in the
quick reference guide entitled the Omnii Hand-Held Computer Reg-
ulatory & Warranty Guide, PN 8000191.
Getting To Know Your Omnii 2 - 3
1-6.
3-44.
"Accessories".
A-6.
E-5.
for details about reserving battery