Table of Contents
Advertisement
If you're using the keyboard:
•
Highlight the barcode you want to work with, and press the [RIGHT] arrow key to display the sub-menu.
•
Use the [UP] and [DOWN] arrow keys to highlight a parameter.
•
To change a parameter value, press [SPACE] or the [RIGHT] arrow key. If a field requires text entry, a text
box is displayed in which you can enter the appropriate value.
Options
•
Tap on the + sign next to Options to display these parameters.
Dot Time (msec)
The value selected for "Dot Time (msec)" determines (in milliseconds) how long the targeting dot remains on
before the scanner switches to a normal scan sweep. When you double-tap on this parameter, a dialog box is
displayed in which you can enter a value from 0 to 3000. A value of 0(zero) disables the target dot.
Short Code
When enabled, this parameter allows scanning of short I 2 of 5 barcodes (2 characters). When disabled, these
short barcodes are rejected.
Enabling "Short Code" may reduce the robustness of the decoding since the hand-held must decode more
potential barcodes; it is therefore not recommended for general-purpose barcodes with 4 or more characters.
Verify
The value entered for this parameter determines the number of correct additional decodes required after the
initial decode, prior to a barcode being accepted. Higher values significantly increase the time it takes to
decode a barcode but also improve the reliability of the decoded barcode.
Security
This parameter controls the tolerance for decoding edge-to-edge barcodes (Code 93, Code 128, UPC/EAN).
Lower values have a lower tolerance for misreads, but they also increase the time it takes to decode the
barcode. The default value of 30 is generally a good compromise setting.
The barcode symbologies for the scanner are listed in the following table.
Code 39
Code 128
EAN 13
EAN 8
UPC-A
UPC-E
Codabar (disabled)
Non-Decoded Barcode Symbologies
Code 93 (disabled)
Code 11 (disabled)
Interleaved 2 of 5 (disabled)
MSI Plessey (disabled)
Discrete 2 of 5 (disabled)
IATA 2 of 5 (disabled)
Scanner Settings C - 11
Advertisement
Table of Contents
Troubleshooting
