Battery Charger (6-Slot) - Model St3006 - Motorola 7545MBW User Manual

Connecting ST1002 to vehicle power and communications in a typical setup
Figure 4-21
USB and Serial access*
* Note:
To enable power to this port, in your Omnii desktop, go to Control Panel>Scanners, which opens
the Scanner Settings menus. In the Ports menu, select
NOTE
For the CA3002 Vehicle Power Outlet (CLA) Adaptor, replace with same fuse
type and rating.

Battery Charger (6-Slot) - Model ST3006

The ST3006 is designed to charge up to six Omnii lithium-ion batteries at one time.
IMPORTANT
IMPORTANT
Omnii
ST1002
MT3326
Mounting Bracket
CA3001 Cable
The serial port is 5 VDC, 1 A maximum power out and is defaulted to off.
The battery charger is shipped with its own quick start guide — ST3006
6-Slot Battery Charger Quick Start Guide (PN 8000204). It is critical that it
be reviewed for additional information and updates.
When ordering a charger, you must also order an IEC-320/IEC-60320 C13
power cord separately.
MT3325
Arm/Ball Kit
MT3502 Circular Plate
PS1350
Pre-regulator
OR
OR
CA3002 Vehicle Power
Outlet (CLA) Adaptor
for the Power parameter under the
ON
Accessories 4 - 25