Vehicle Cradle Mounting Recommendations - Motorola 7545MBW User Manual

The Omnii vehicle cradles are highly ruggedized, single station docks. Although they provide quick insertion
and removal, the cradles hold the Omnii securely even when operated in high vibration environments (such as
vehicles not equipped with suspensions).
The Omnii vehicle cradle is available in two models:
• Model ST1000 - Unpowered cradle.
• Model ST1002 - Powered cradle with communications port. A DE9M serial port (powered) and two USB
Host interfaces.
Front and back of ST1002 with Omnii
Figure 4-16
Motorola also supplies a range of standard mounts for the hand-held vehicle cradles, and the Omnii vehicle
cradles are compatible with all of them.

Vehicle Cradle Mounting Recommendations

WARNING
Release button
Before mounting a vehicle cradle in a vehicle, there are a number of oper-
ator safety issues that require careful attention. An improperly mounted
cradle may result in one or more of the following: operator injury, opera-
tor visibility obstruction, operator distraction and/or poor ease of egress
for the operator. Motorola strongly recommends that you seek profes-
sional mounting advice from the vehicle manufacturer.
Ensure that you read the ST1002 Vehicle Cradle Installation Instructions
document (PN 1020305), enclosed with the ST1002, for important safety
information on connecting fuses.
Cable routing within a vehicle cab also requires careful consideration,
especially for devices with loose cables. If you are unable to obtain suita-
ble advice, contact Motorola for assistance. Note also that for better
protection, the equipment should be mounted inside the vehicle roll cage.
Mounting holes
Power/Communications port
Accessories 4 - 19