Bosch DCN Next Generation Installation And Operation Manual page 47

Conference System
Figure 3.40 Top view
The top of the channel selector contains:
6.
7.
8.
9.
Figure 3.41 Rear view
The rear of the channel selector contains:
10. External headphones (solder pads) - Connect an external headphones socket to the
The following sections give more information about the mentioned subject:
–
–
–
–
Bosch Security Systems B.V.
7
DCN cable - Connects the channel selector to the DCN system.
DCN socket - Makes a loop-through in the DCN system with the channel selector.
Level reduction plug - Reduces the headphone signal level when the microphone of a
connected device is enabled.
Solder spots
10
channel selector.
Installation: Section 5.6 DCN-Flush mounted products.
Connection: Section 6.18 DCN-FCS Channel Selector.
Configuration: Section 7.14 DCN-FCS Channel Selector.
Technical Data: Section 11.2.20 DCN-FCS Channel Selector.
Installation and Operation manual
6
X14
9 8
System Overview | en
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
47