Bosch DCN Next Generation Installation And Operation Manual page 148

148 en | Connection
6.26 DCN-DDB Data Distribution Board
Use the DCN cable to connect the data distribution board to the DCN. You cannot make a
loop-through in the DCN with the data distribution board.
NOTICE!
You connect the data distribution board to the DCN with a trunk splitter (LBB4114/00,
LBB4115/00) to bypass the data distribution board.
Figure 6.56 RS232 port, connection
Pin
1
2
3
4
5
6
7
8
9
Table 6.32 RS232 port, connection
DCN-NG_IOM_V4.1 | V1.3 | 2012.07
1 5
6 9
Definition
---
RxD
TxD
---
SG
---
RTS
CTS
---
Installation and Operation manual
Conference System
Description
Not connected
Receive Data
Transmit Data
Not connected
Signal Ground
Not connected
Request To Send
Clear To Send
Not connected
Bosch Security Systems B.V.