Toshiba GL-10x0 Scan Operator's Manual page 71

Message
Finish glass Scan (Job full)
Finish ADF Scan
100 sheets can be set on the ADF.
To continue, repeat the operation.
Job Overflow. To continue, repeat
the operation.
Job Overflow. Finish ADF scan.
Scanner Memory full. Job is
canceled
GL-10x0 Scan Operator's Guide
Error Messages Defined
Finish scanning, reduce the resolution, or change the
document type to
Place an original on the ADF.
The number of sheets has reached the maximum.
Reduce the number of sheets to scan again.
The amount of data has reached the maximum for a
scan.
Reduce the amount of data to scan again using any of
the following methods:
1. Reduce the number of pages.
2. Reduce the resolution.
3. Select
The amount of data has reached the maximum for one
scanning. Reduce the amount of data to scan again
using any of the following methods:
1. Reduce the number of pages.
2. Reduce the resolution.
3. Select
When this error occurs during continuous scanning, data
scanned before the error occurred is stored.
To use the stored data, press the
The scanner memory is full and your request has not
been accepted. Use TopAccess to determine the job in
progress. When any job is present, either wait for the job
to be completed, or delete it. If the job does not
complete, delete it. If the error persists, restart the
controller. If the error still persists after restarting the
controller, contact the network administrator.
Action (End User)
or
Text Text/Photo
or mode.
Text/Photo Text
or mode.
Text/Photo Text
to scan again.
key.
Finish
61