Editing User Program Effects - Sony DFS-700 Service Manual

User Program Effects

Editing User Program Effects

You can recall a created user program effect, and change its parameters, or
add, delete, or copy key frames.
TITLE
1
EDITOR LUM
6
GPI CRK
SET UP MASK
SHIFT CCR LIGHTING
AUXILIARY
BLACK 1
BACKGROUND
BLACK 1
FOREGROUND
BLACK 1
To recall a user program effect
Use the following procedure.
1
Press the SET button.
2
Use buttons 0 to 9 to enter the user program effect number.
The number you entered appears in the PATTERN NUMBER display
window.
3
Press the ENTER button.
The STATUS display window shows the number of key frames in the
user program effect you specified in step 2.
4
Press the EDIT button.
The button lights, and the editing screen for the user program effect
you specified in step 2 (the image selected on the FOREGROUND bus
buttons) appears.
The STATUS display window shows the number of key frames saved
in the user program effect.
4-12
Chapter 4 Advanced Operations
STATUS display window
EDIT display window
USER PGM SNAP SHOT
DSK EDGE
2
4,8
STATUS EDIT
LUM LUM TRAIL
SHADOW
CRK BORDER BEVELD
EDGE
INITIAL EDIT LEARN
MASK MASK SOFT
RECALL
MATTES BORDER PATTERN PAGE F1 F2 F3 F4 F5 LOCATION
HOLD
ADJ INPUT
1
EFFECT
TRANS RATE DSK PATTERN NUMBER
FTB
SET SET
CCR TITLE 1 TITLE 2 DSK SUPER BG FRGD 2 MEMORY FRAME FREEZ MIX EFFECT N/R REV DIRECT DIRECT DSK PVW
SOURCE SOURCE FILL RECALL PATTERN
FADE
LAST X
TO
7 8 9
2 3 4 5 6 7 8 MEMORY INT TITLE INS BLACK
VIDEO
4 5 6
DEL
INT 2
2 3 4 5 6 7 8 MEMORY CUT
VIDEO
P IN P
DSK
1 2 3
RST
DOWN UP ENTER
0
AUTO
INT 3,7
2 3 4 5 6 7 8 MEMORY
VIDEO TRANS
PATTERN/KEY PAD
5
To change the key frame parameters
After carrying out the procedure to step 4 in the section "To recall a user
program effect" above, use the following procedure.
5
Press the UP or DOWN button in the pattern/numeric keypad, so that
the number of the key frame for which you want to change the
parameters appears in the EDIT display window.
6
Change the parameters in the menu.
7
Press the ENTER button.
This saves the changed key frame parameters.
Repeat steps 5, 6, and 7, to change the key frame parameters in all
desired key frames in turn.
8
When all the changes are made, EDIT button.
The button goes off, and the modified user program effect is resaved.
4-13
Chapter 4 Advanced Operations