9 Dial button
Select this button by pressing the
ENTER button on the Remote Commander. This starts calling the remote party
whose dial number is entered in the number input box.
0 Number input box
To call a remote party not registered in the Phone Book, select this box by
pressing the
the IP address or the ISDN line number.
Calling a Remote Party
To call a remote party by entering their number directly
Line type
1
Use the V, v, B or b button on the Remote Commander to select
F
"
from the launcher menu, then press the PUSH ENTER button. Or press
the CONNECT/DISCONNECT (
Commander.
2
Use the V or v button on the Remote Commander to select the type of line
to be used, then press the PUSH ENTER button.
AUTO: A line for connecting is automatically selected, based on the number
entered in the number text box.
IP: Connects to a videoconferencing system on the remote site via a LAN.
ISDN: Connects to a videoconferencing system on the remote site via an ISDN
line.
TEL: Connects to a phone on the remote site via an ISDN line for a voice
meeting.
SIP: Select this option when connecting to an IP phone using an SIP server.
3
Press the V, v, B or b button of the Remote Commander to select the
number input field, and then the PUSH ENTER button.
4
Enter the remote party's IP address or line number.
V, v, B or b
V, v, B or b
button on the Remote Commander, and then enter
Number text box
Starting a Conference by Calling a Remote Party
button, and then the PUSH
Dial
/
) button on the Remote
Line I/
"
95