Connecting the External MCU
Connecting the external MCU (Multipoint Control Unit) enables conduct of a
multipoint videoconference unless the MCU software is installed into the
Communication Terminal.
Activating the Chair Control
If the MCU for the ISDN connection is equipped with the chair control
function, the chair control can be activated for up to 99 terminals connected.
The chair control mode allows you to specify any terminal to display on the
monitor screen, to broadcast the specified picture to all the terminals, or to
broadcast the local picture to all the terminals.
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu opens.
2
Use the V, v, B or b button to select "Chair Request" under "Broadcast
Mode".
Display Control
228
Connecting the External MCU
LAN or ISDN
MCU
Display
Control
Near
Far
Camera
POWER
POWER
POWER
POWER
POWER
PCS-PG70/
PG70P
Broadcast Mode Terminal
Chair
Request
1