Registering The Remote Parties In The Multipoint Connection List - Sony IPELA PCS-G70 Operating Instructions Manual

Registering the Remote Parties in the Multipoint Connection List

You can register the multipoint connection list that includes all remote parties
for a multipoint videoconference in the Phone Book. It allows you to dial all
the parties simultaneously.
You can enter new remote parties to register the multipoint connection list, or
add the parties registered in the Phone Book to the multipoint connection list.
To register a multipoint connection list in the Phone Book
The basic procedure for registration is the same as the registration of a remote
party for a point-to-point videoconference. For details on the procedure, see
"Registering a New Remote Party" on page 77.
1
Select "New Entry" in the Phone Book menu to display the List Edit menu,
then enter the name of the multipoint connection list in the Index text box.
2
Select "Multipoint" under "Line I/F".
SIP
3
Select the line interface icon or a still image to be displayed in the Phone
Book.
The icon is shown as "
4
Set up the line interface of the remote parties.
When PCSA-M3G70 H.323 MCU software (for LAN) is installed
Select "IP", and enter the IP addresses of all the parties for the multipoint
videoconference in text boxes A to E.
When PCSA-M0G70 H.320 MCU software (for ISDN) is installed
Select "ISDN" or "TEL", and enter the line numbers or phone numbers of all the
parties for the multipoint videoconference in text boxes A to E.
".
Setting for a Multipoint Videoconference
213